Wet Leakage Current Test System

Wet Leakage Current Test System

Model: TH-6807 series

Test item: It mainly tests the insulation of solar modules in wet conditions, and verifies the corrosion resistance and safety of solar modules.

Applications Standard:

 IEC 61215、IEC 61730、UL 1703、VDE0126

Main indicators and functional requirements

1、Main performance parameters

1.1 Temperature control system

1)    Temperature range：5-35℃；

2)    Temperature measurement accuracy：0.1℃；

3)    Cooling power：1.5HP；

4)    Heating power：1.5KW；

1.2 Sink and support

1)    Sink size (L*W*H)：2800*1700*200mm；

2)    The sink is equipped with a well shelf to facilitate the shelving and taking out of the test sample

3)    The sink is equipped with two solution water outlet and water return outlet at both ends, and the bottom is equipped with a water outlet. Two of the water outlets are connected to the water pump, and the pipe mouth is inverted 45° diagonal to prevent splashing around the solution. The height of the water return outlet can be adjusted according to the test requirements, so that the solution is sufficient to cover the surface of all components except the junction box leading-in wire (when the junction box is not designed to be waterproof);

4)    The circulating water inlet is equipped with a stainless steel filter screen;

5)    Material: Plexiglass;

6)    Sheet thickness: 15mm;

7)    Support size (L*W*H) : 2800mm*1700mm*400mm;

8)    The overall support is welded with high quality steel square pipe (38x38mm);

9)    The bottom of the box is designed to bear the weight of the whole equipment and specimens, so the bottom has a load-bearing structure, and the base frame is welded with 8 # channel steel to prevent the overall deformation of the equipment; Four sets of adjustable high and low foot pads and casters (self-locking) are configured under the frame for easy moving

1.3 Conductivity tester

1)    Test range: 1.0 ~ 2000μS/cm (equivalent to 500Ω•cm ~ 1000000Ω•cm);

2)    Application temperature: 0 ~ 99℃;

3)    Base temperature: 25℃ (automatic temperature compensation if the temperature deviates);

4)    Basic error: ±1.0%FS;

5)    Temperature error: ±0.5℃ (0 ~ 60℃);

6)    Repeatability: ±0.2%FS;

7)    Stability: ±0.2%FS;

1.4 Insulation tester

Withstand voltage test

1)    Output voltage: 0-12KV (VDC);

2)    Voltage accuracy: 3%;

3)    Voltage resolution: 1V;

4)    Output current: 5mA;

5)    Current accuracy: 3%;

6)    Current resolution: 1μA;

7)    Pressure boost time: 0.4S to 999.9S;

8)    Upper limit setting: 0.01-5mA;

9)    Lower limit setting: 0-5mA;

Insulation test

1)    Test voltage: 500 ~ 2500 (VDC);

2)    Allowable error: ≤±5%;

3)    Pressure boost time: 0.4S to 999.9S;

4)    Test resistance: 1 ~ 99000 (MΩ);

5)    resistance error: plus or minus 3 word (+ 3%) @ Ω Ω 9.99 G (100 k) / + 3 word (+ 20%) @ Ω (10 G - 99 - G Ω);;

6)    Test time: 1 ~ 999 (S) ≤±3%;

7)    Interruption time: 5 ~ 99 (S) ≤±3%;

1.5 dimension

1)    Power supply: AC380V, 3KW;

2)    Floor area (L*W*H) : 3700*1600*1200mm;

3)    Weight: 300kg;

4)    Water: 1 inch (DN25) water pipe;

5)    Compressed air: Φ6mm, 0.4MPa;

6)    Drainage: Φ100mm.

TH-6807 mainly tests the insulation of solar modules in wet conditions, and verifies the corrosion resistance and safety of solar modules.

1. Pre-service
--24 Hours online service for your consult.
--Help choose right model, and a series of service, person, advise.

2. Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convenience.
--Promptly production and delivery, inform you in time.
--Can provide invoice value as you like to decrease your tax.

3. After sale service
--1 year warranty service and all life maintenance.
--Technical Engineer are available for oversea training.
--Free change for some parts
--Remote control technical consult
--Maintenance plan

4. Commitment
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

5. Good Packaging
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

Q:Are your company a trading one or a factory?
A:Factory + trade (integration),More than 12 years focusing on test equipment field,6 years exporting experience.

Q:After an order is placed, when to deliver?
A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.

Q:What about the warranty with after - sales services?
A:The testing machine is guaranteed for 12 months by HAIDA,we can help you to repair
your problem controller freely,even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

Q:What about the product' services and quality?
A:Each equiopment must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A :Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.

Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
Contact information:

Dear customer,
If you need our testing machines, please send us inquiry without any hesitate !